Dismantling the Gamecube (Taking apart the Gamecube)

I was thinking of making a component cable for myself, but this turned out to be too big a project. Here is the dismantling of the gamecube instead. There are 4 proprietary screws holding the bottom of the case to the top. They look like an E6 to me, external Torx #6. I tried an E6 socket with no success, the hole in which the screw resides is very deep.

First thing you'll need is the screwdriver. I got mine from ebay. Two types are available, the screwdriver and the bit. I think the bit is probably more useful, you can put it on a powered screwdriver that way.

There are 4 screws holding the base to the top, after removing those screws the top just slides off.

Next you remove all the screws holding the cd player to the motherboard. It's worth noting that the nintendo design is very technician friendly. All the major components use sockets and are easily removed.

With the CD removed you can unclip the front and back panels. The front panel holds the controller ports and memory slots. Once those are removed, you remove the 6 screws holding the motherboard to the bottom board. There is some circuitry below the motherboard that I didn't bother dismantling.

Once you have removed the motherboard and turned it over, you can clearly see the pins for the digital and analog ports.

Comments

Add new comment

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

About the Author...

I published a Thing on @thingiverse! https://t.co/xK6XzN7Cbh #thingalert Fri Jun 12 17:08:46 +0000 2020

Slides from LISA 2019 Linux systems troubleshooting #LISA2019 https://t.co/D4dMKflK6R Tue Oct 29 05:59:30 +0000 2019

https://t.co/AGeihMALAv configuring grub2 with EFI Fri Sep 13 05:20:01 +0000 2019

I published a Thing on @thingiverse! https://t.co/IYpRyEb7Hz #thingalert Tue Jul 23 19:27:57 +0000 2019

Nokogiri install on MacOSX https://t.co/v3An0miW9L Fri Jul 12 15:06:49 +0000 2019